SmartFeeder User Manual

The Petnet SmartFeeder user manual will help guide you and your furry loved one start a new feeding experience. This manual will cover the setup and installation steps, a feature overview, cleaning instructions and more!

Download - SmartFeeder User Manual.pdf

Meet Your SmartFeeder
The Petnet SmartFeeder is a Wi-Fi connected automatic pet feeder for cats and dogs. Using the Petnet App you can personalize your pet’s daily meal times, portion sizes, order pet food for delivery – and even feed your pet from your phone! Comes with a 1-year limited warranty and customer service for the life of the product.

Setup and Installation
The Petnet SmartFeeder setup and installation takes 3-5 minutes.
To get started, you’ll need the following four items:

SmartFeeder setup takes about 5 minutes.

    1.    Install the Petnet App
    2.    Register your SmartFeeder
    3.    Connect to Wi-Fi

NOTE: The SmartFeeder works with Wi-Fi 802.11 b/g/n (2.4GHz) only.
Visit for more guides and videos.

1. Download Petnet App
To configure your SmartFeeder, you’ll need to download the Petnet App. Available on the Apple App Store and Google Play.

2. Create your Petnet account 
Follow the directions on the Petnet App to create your user account, add your pet’s profile and what pet food they eat.

3. Plug in AC adapter and power on the SmartFeeder
The power switch is located on the back of the SmartFeeder Base. The light on the front of the SmartFeeder will illuminate red once powered on.

4. Scan the QR code on the bottom of the SmartFeeder
The power switch is located on the back of the SmartFeeder Base. The light on the front of the SmartFeeder will illuminate red once powered on.

5. Connect the SmartFeeder to your phone
After, scanning the QR code use the Petnet app to choose your Wi-Fi network and enter your Wi-Fi password. Ensure Bluetooth is enabled on your phone and press connect.

6. Set up your SmartFeeder
Find the blue tab on the front of SmartFeeder base and pull out the bowl tray until you reveal the entire blue label. Then, remove the label from the bowl tray and slide the plastic bowl on the tray until it clicks into place.

7. Add food to hopper
Ensure the Food Container Insert is placed in the food container and locked into the base. Pour food into the hopper, leaving a 1-inch clearance at the top.

    •    Kibble Sizes -  Dry food 1/8” - 5/8” in diameter
    •    Food Storage - Stores 5lbs - 7lbs of dry food

8. Congrats! You’re all set up.
Use the Petnet App to set up feeding times and portions sizes. 

Features Overview
A smartphone, Wi-Fi (2.4GHz) and a Petnet account are required
for setup, wireless mobile notifications and software updates

Recommended Placement
Place your SmartFeeder on a flat surface in your home.

If you have multiple pets, we recommend you place each 
SmartFeeder in a separate room to avoid conflict during feedings. We do not recommend using the SmartFeeder outdoors.

NOTE: For ideal performance, place your SmartFeeder away from direct sunlight and areas of high moisture.

Cleaning your SmartFeeder
The detachable lid, food container, food container insert, bowl tray,
and metal bowl insert are dishwasher safe.  All other parts can be cleaned with a wet towel or sponge.

Hand wash feeder base
Use a wet towel or sponge to wipe food oil and residue from the SmartFeeder base.